MACO BSS 360 AR: capacity 230 x 230mm
NC Control system with display and user’s interface keyboard to allow for the entering and storing of up to 200 programs. It is possible to enter every program with: length, scrap length, number of pieces, angle, scrap angles.
NC Control system with display and user’s interface keyboard to allow for the entering and storing of up to 200 programs. It is possible to enter every program with: length, scrap length, number of pieces, angle, scrap angles. Diagnostics pages to resolve hardware and software problems. Specific software for: calculation of the specular workpiece length, minimum scrap material for pieces with asymmetrical section, minimum scrap material due to change of angle in adjacent pieces.
Bar feeding and head rotation through a hydraulic system or by means or brushless motors, linear guides and re-circulating ball screws in the version with the servo motor acceleration and decceleration ramps with NC control. First bar scrap cut length programmable in the version with loading device.
Band Sawing machine to automatically cut irregular angle work pieces either left or right. Band support device with: feeler arm for quick approach, head descent sensitivity regulator, adjustable limit switches. Workpiece clamping with dual device (patented): one fixed and one mobile vice. Angular rotation system of the band support device, with automatic clamping of the programmed angular position.
|Country of Origin||Canada/U.S|
|Band Dimensions||Rectangular (H x W)||3150 x 27 x 0.9|
|Band Motor||1.5 – 2.2kW|
|Hydraulic Pump Motor||1.47kW|
|Feed Stroke||Hydraulic Version||780mm|
|Feed Stroke||Brushless Version||1350mm|
|Cutting Speed||35/70 m/min|
|Cutting Table Height||940mm|
|Dimensions (mm)||2200 x 3100 x 1300|
|Capacity at 90 degrees||Round||260mm|
|Square||230 x 230mm|
|Capacity at 45 degrees (Dx – Sx)||Round||170 – 230mm|
|Square||150 – 230mm|
|Capacity at 45 degrees (Dx – Sx)||Round||120mm|
|Square||110 x 150mm|