MEP Shark Bandsaw 281 NC 5.0: capacity 280 x 200mm

SHARK 281 NC 5.0 is a MEP Shark Bandsaw and an electro hydraulic band sawing machine, which has automatic operation/dynamic and manual mode for cutting from 0 degrees to 60 degrees left.

Category:

Description

SHARK 281 NC 5.0 is a MEP Shark Bandsaw and an electro hydraulic band sawing machine, which has automatic operation/dynamic and manual mode for cutting from 0 degrees to 60 degrees left.

It is a machine with a double axis multi microprocessor, with the latest generation controllers for automatic sawing machines designed by MEP, so as to obtain on the same bar, 1000 different lots, each of different lengths and quantities.

OPERATION:

Semi-automatic/dynamic cycle: lowering the head manually, so as to position right above the material, the semi-automatic cycle starts by pressing the trigger switch on handle.

Manual or semi-automatic/dynamic cutting cycles are free of any parameters, for the execution of odd cuts.

Details

Machine Type Bandsaw
Operation Automatic
Brand MEP
Model Shark 281 NC 5.0
Country of Origin Italy

Specifications

Blade Diameter 2950 x 27 x 0.9mm
Motor Power 1.5/1.8kW
Speeds (m/min) 36/72
Max Vice Opening 285mm
Capacity at 0 degrees Round 250mm
Square 230mm
Rectangular 280 x 200mm
Capacity at 45 degrees Round 190mm
Square 180mm
Rectangular 180 x 180mm
Capacity at 60 degrees Round 120mm
Square 110mm
Rectangular 110 x 110mm
Machine weight 435kg
Dimensions (assembled) 2000 x 1000mm

Features

  • Console with centralized control, installed on an articulated arm to follow the operator in every operating position for the controls and the EMERGENCY.
  • Field bus control system (MODBUS protocol) with double microprocessor with serial connection.
  • Display: 20 characters read on four lines so as to visualize technological parameters such as: band speed, number of cuts programmed and carried out, band thickness, length fed in each stroke, cutting time, amperometer, band tension, diagnostics and/or caution messages visualized.
  • Visualization and registration of alarms and events with the possibility to visualize the story of occurred events.
  • Electronic inverter for the continuous adjustment of the band speed from 15 to 100m/min.
  • Latest generation hydraulic control unit, with high efficiency and low energy consumption.
  • Bar feeder with recirculating balls screw/nut and stepper motor (feed in length in one stroke 600mm, that can be repeated in order to cut any length).
  • The headstroke, according to the dimensions of the material which has to be cut, is set directly on the control panel.
  • Electronic transducer to visualize band tensioning.
  • Automatic adaptive shearing stress control system with servo valve mounted directly on the cylinder.
  • Coolant tank inside the steel base with two electric pumps so as to lubro-refrigerate band. The drawer to collect chips can be replaced with a motorized chip evacuator.
  • Preset to be equipped with the spray mist system (OPTIONAL), as well as with the standard-delivered traditional lubrication with emulsible oil.
  • Wire chip brush for band cleaning.
  • Machine arranged for handling with movement equipment.
  • Bi-metal for solids and sections.
  • Service keys and instructions manual for maintenance and spare parts list

Enquiry