MEP Shark Bandsaw 282 SXI Evo (Semi Auto): cap’ 280 x 200mm

The SHARK 282SXI evo is a semi-automatic hydraulic Bandsaw that can cut from 45° right to 0º to 60º left.

Category:

Description

The SHARK 282SXI evo is a semi-automatic hydraulic Bandsaw that can cut from 45° right to 0º to 60º left.

Machine is controlled by a single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP of Italy.

Operation is simple, you start the cycle by means of the push-button. Thereafter the following steps are carried out: the vice closes and the motor starts, the head goes down to execute cut, motor stops, head returns to top position and vice opens.

Also as standard the 282SXI Bandsaws has additional cutting cycles of Manual and Dynamic cycle. Dynamic is similar to semi-automatic dynamic cycle except the operator lowers the head manually then engages the trigger in the handle to engage the semi auto mode.

Details

Machine Type Bandsaw
Operation Semi Automatic
Brand MEP
Model Shark 282SXI Evo
Country of Origin Italy

Specifications

Blade Diameter 2950 x 27 x 0.9mm
Motor Power 1.8kW
Speeds (m/min) 36/72
Max Vice Opening 285mm
Capacity at 0 degrees Round 250mm
Square 230mm
Rectangular 280 x 200mm
Capacity at 45 degrees Round 190mm
Square 180mm
Rectangular 180 x 180mm
Capacity at 60 degrees Round 120mm
Square 110mm
Rectangular 110 x 110mm
Machine weight 440kg
Dimensions (assembled) 1730 x 900mm

Features

  • Full cast iron bow that is capable of withstanding extremely high band tensions without deforming.
  • Tungsten Carbide Blade guides perfectly shaped to provide support and guidance for blade.
  • The electrical panel meets all European and Australian standards (wiring is totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- it includes IP55 control handle.
  • Vice with fast clamping device.
  • Console with all controls centralized, mounted on an articulated arm.
  • Low voltage soft keyboard, in polyester with thermo shaped buttons.
  • Digital display with the following messages: Diagnostics, alarms inc. cause and description, input and output status for trouble shooting, cut counter, timer for the cuts, amps being drawn by motor, band tension, numerical display of head position.
  • Latest generation of hydraulic controls and pumps. Highly efficient system with low power consumption.
  • Two speed band rotation (36/782m/min). Infinitely variable electronioc speed iverter is optional.
  • Top and bottom position of cutting head easily programmed from console.
  • The operator can slide the vice to the left or right hand side of the bow quickly and easily in case of mitering.
  • Wide flat working surface with rotating table mounted on roller bearings.
  • Adjustable precision stops for quick setting at 0º,45º, 60º left and 45º right.
  • Steel base with built in removable coolant tray.
  • Steel base is designed so machine can be easily moved with forklift of pallet trolley.
  • Electric pump for coolant built into removable swarf tray.
  • Wire brush for cleaning the blade.
  • Double head return springs.
  • Stock support arm on in feed side with roller. Ready to mount loading tables.
  • Bi-metal band suitable for solids and sections.
  • Service keys and instructions manual for maintenance and spare parts list.

Enquiry