MEP Shark Bandsaw 330 NC 5.0: capacity 330 x 250mm

SHARK 330 NC 5.0 is an electro-hydraulic automatic band sawing machine, which can also operate in semi-automatic cycle to cut at 0 degrees with a restpiece of 85mm which cannot be fed in.

Category:

Description

SHARK 330 NC 5.0 is an electro-hydraulic automatic band sawing machine, which can also operate in semi-automatic cycle to cut at 0 degrees with a restpiece of 85mm which cannot be fed in.

CNC machine with controlled double axis so as to obtain, on the same bar, 1000 different lots, each of different lengths and quantities.

Details

Machine Type Bandsaw
Operation Semi-automatic
Brand MEP
Model Shark 330 NC 5.0
Country of Origin Italy

Specifications

Blade Diameter 3320 x 27 x 0.9mm
Motor Power 2.2kW
Speeds (m/min) 15/100
Max Vice Opening
Capacity at 0 degrees Round 300mm
Square 250mm
Rectangular  330 x 250
Capacity at 45 degrees Round
Square
Rectangular
Capacity at 60 degrees Round
Square
Rectangular
Machine weight 1025kg
Dimensions (assembled) 2320 x 2400mm

Features

  • Console with centralized control, installed on an articulated arm to follow the operator in every operating position for the controls and the EMERGENCY.
  • Field bus control system (MODBUS protocol) with double microprocessor with serial connection.
  • Display: 20 characters read on four lines so as to visualize technological parameters such as: band speed, number of cuts programmed and carried out, band thickness, length fed in each stroke, cutting time, amperometer, band tension, diagnostics and/or caution messages visualized.
  • Visualization and registration of alarms and events with the possibility to visualize the story of occurred events.
  • Electronic inverter for the continuous adjustment of the band speed from 15 to 100m/min.
  • Latest generation hydraulic control unit, with high efficiency and low energy consumption.
  • Bar feeder with recirculating balls screw/nut and stepper motor (feed in length in one stroke 600mm, that can be repeated in order to cut any length).
  • The headstroke, according to the dimensions of the material which has to be cut, is set directly on the control panel.
  • Electronic transducer to visualize band tensioning.
  • Automatic adaptive shearing stress control system with servo valve mounted directly on the cylinder.
  • Adjustable rollers for bundle cutting on one row.
  • Adjustable guide to unload cut pieces.
  • Coolant tank inside the steel base with two electric pumps so as to lube-refrigerate band. The drawer to collect chips can be replaced with a motorized chip evacuator.
  • Preset to be equipped with the spray mist system (OPTIONAL), as well as with the standard-delivered traditional lubrication with emulsible oil.
  • Motorized wire chip brush for band cleaning.
  • Machine arranged for handling with movement equipment.
  • Bi-metal band for solids and sections.
  • Service keys and instructions manual for maintenance and spare parts list.

Enquiry