MEP Tiger Coldsaw 352 SX evo: capacity 180 x 95mm

TIGER 352 SX evo is a semi automatic vertical sawing machine to cut steels from 60 degrees left to 45 degrees right, with HSS blade.

Category:

Description

TIGER 352 SX evo is a semi automatic vertical sawing machine to cut steels from 60 degrees left to 45 degrees right, with HSS blade. The machine is controlled by a single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP.

OPERATION: starting the cycle by means of the relative push button, the following steps are carried out: the vice closes and the motor starts, the head goes down to execute the cut, the motor stops, the head returns to top position and the vice opens.

Details

Machine Type Coldsaw
Operation Manual
Brand MEP
Model Tiger 352 SX evo
Country of Origin Italy

Specifications

Blade Diameter 350x32x2.5
Motor Power 1.8/2.5Kw
Speeds (m/min) 15/30/45/90
Max Vice Opening 190mm
Capacity at 0 degrees Round 115
Square 95
Rectangular 180×95
Capacity at 45 degrees Round 110
Square 95
Rectangular 125×95
Capacity at 60 degrees Round 90
Square 90
Rectangular 90×90
Machine weight 410kg
Dimensions (assembled) 1050x 1140mm

Features

  • Panel with low tension controls: polyester membrane keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.
  • Display: 16 characters read on two lines so as to visualize technological parameters such as number of cuts programmed and carried out, cutting time, amperometer, diagnostics and/or caution messages (more than 100 visualized).
  • Registration of alarms and events with the possibility to visualize the story of occurred events.
  • The headstroke, according to the dimensions of the material which has to be cut, is set directly from the control panel.
  • Double set of gears to obtain a high performance – Four gear speed rotation 15/30/45/90 rpm (OPTIONAL 30/60/90/180 rpm).
  • Four speeds blade rotation 15/30/45/90 rpm (OPTIONAL 30/60/90/180 rpm) – Vice with anti-burr device with double clamping of the piece.
  • Sawing head movement on double linear guides with preloaded with recirculating ball screws.
  • Coaxial cylinder with bypass valve for fast approach and linear transducer for head positioning angle.
  • Rotating table on a centre pin with axial bearing which allows higher precision on the cutting angle set.
  • Pneumatic vertical vice.
  • Steel base with chip drawer and removable coolant tray.
  • Electric pump for the blade lubrication and cooling.
  • Wire chip brush for band cleaning.
  • HSS blade 350x32x2.5 for solids or sections.
  • Adjustable rod to measure stop to make cuts of the same length with millimetered steel rod.
  • Preset to be equipped with the spray mist system (OPTIONAL), as well as with the standard-delivered traditional lubrication with emulsible oil.
  • Service keys and instructions manual for maintenance and spare parts list.

Enquiry